Things to build special attention when building chicken cages

The construction of chicken cages requires special attention, and the chicken cages commonly used by the people are on the farm. These apps provide a safe environment for chickens and to prevent natural enemies of chickens. Chicken cage chickens also allow access to fresh air, exercise and get rich, such as cereals and grass. Although you can buy chicken cages, they can be expensive. Another way is to make your own chicken cage usually find a low-cost material in the hardware store.

When making the chicken cage, place 6 2-4 plates on a flat surface. Find the center point from one end of each board measured four feet. Each board forms 12 rebounds at its center point, 4 feet long. Find the center point of the two 4-foot boards. Cut the two plates at their center points to form four 2-foot plates.

 

Two eight feet 2-4 need to be placed over the flat surface during the cage manufacturing process. Position the plate with two 4-2--4 flat surfaces to form a rectangle. Make sure the eight feet between the four foot pedals. Fix the board to each other with two screws in each corner. Repeat this step to form a second rectangular frame.

 

Place four 2-foot panels in a rectangular box at the corner to keep them upright. The fixing plate is screwed to the frame. This rectangular frame now forms the bottom of the cage. Place the center of the second rectangular box in the three 4-foot panels so they are parallel 4-foot rectangular edges. Spread the board so they are about two feet apart. This will form the top of the broiler cage. The fixing plate is screwed to the frame. This will make a complete and sturdy cage.