Precautions when using chicken cages

Wholesale chicken cages pay attention to the precautions when using wire cages. Many breeder farmers believe that wire cages are better than other cages. Because the wire cage seems to be much stronger. In this way, when the chicken is raised, the chicken can not easily come out of the chicken cage, and it can also well prevent the harm caused by the rat and the chicken.

In the construction of the wire cage, the first part of the cage is suitable for the second fold. The floor area will double. Place all the corners with the second piece, the first piece with wire clips and clip pliers. Secure several sections of the floor between the two floors of the floor. This will prevent the hens from getting their toes between the two layers.

 

When making a wire broiler cage, use a wire cutter to remove a 12 x 12 square inch lower center area. Cut a separate 14 x 14 knot leftover wire placed at the opening ceremony and as a door. Use the clip on the side of the door as a hinge. On the other side, close the door with a rope or latch. Bend the cusp back. Longitudinal slitting, in a 12-inch rubber tube. Slide the arm to the lower section to open the door to prevent scratches.

 

When making wire cages, it is also necessary to pay attention to measuring the size of the feeders. The hole is cut in the cage and will accommodate the feeder. Clip them outside with wire. Place the tube cage to avoid damage to the hen when eating and drinking water in the cutting field. Install the nest box or inhabit the cage with wire. The stock provides food, water and bedding, and the house is ready.

 

Because wire cages do not provide natural protection from harsh weather and wind, cages must be placed in a protected area, such as a barn or shed.