The late maintenance and cleaning of the egg incubator

First, the incubator weekly maintenance content

1. Check the water level of the humidification pan.

2. Check the sealing status of the door.

3. Check the ventilation exhaust.

4. Clean the fan on the screw on the turn of the villi and other debris, to prevent the card does not move.

5. Wipe the outside of the chassis and control cabinet with a semi-dry rag; the hatching machine must clean the humidification basin.

And clean the top of the machine. Second, the incubator monthly maintenance content

 1. Check the fan, humidification, turn the egg chain is intact.

2. Check the heating function.

3. Check the ultra-high temperature alarm function.

4. Check the egg function is normal.

5. Thoroughly clean disinfection equipment.

6. After the incubation of each batch must be cleaned machine, humidification basin and humidification evaporator plate.

Third, the incubator every three months to maintain the content

1. Clean the probe.

2. Calibration temperature and humidity.

3. Fan bearings to add a butter.

4. Will turn the egg worm gear oil after washing with butter lubrication.

5. Throttle mechanism of the screw and sliding parts to add butter.

6. Humidification, turning the egg reducer to change the oil.

7. A comprehensive inspection of the system control functions.

Four,the incubator machine for a long time when not in the maintenance of the machine for a long time before leaving the machine, you must start heating the drying machine, the humidification of the water in the basin put the net drying, the various parts of the operation to be washed, with butter to prevent Rusty. This is very important. You decided not to use a machine, but did not follow the above method to maintain it, then wait until you want to use it next time, it may be a lot of trouble, can not work.

Pre： Why broiler cage is better than feeding broiler on ground ?

Next：The advantage of paper egg tray