Broiler cage equipment

Broiler cage feeding equipment is used as a daily feeding device for chickens. If any failure is found, it should be repaired in time to avoid affecting the breeding of chickens. Farmers should also pay attention to some safety matters during maintenance.

First, it is to prevent crush injury: when repairing the feeder of the broiler cage raising equipment, it must be well supported before repairing it.

Second, it is anti-corrosion: When preparing the battery electrolyte, repairing the battery, and checking the height and density of the electrolyte, do not let the electrolyte splash on clothing or skin.

Third, it is to prevent poisoning: During the repair, the engine must be started frequently, and the room is often filled with a large amount of exhaust gas. Therefore, air circulation in the repair environment must be maintained to prevent chronic poisoning.

Fourth, anti-explosion: When welding the components, thoroughly clean the oil before welding, and confirm that the inner cavity is free of oil and gas before welding. Mars should be eliminated between the batteries to prevent the accumulation of hydrogen and oxygen from the battery overflow and sparks to explode.

Fifth, it is fire prevention: no open flame should occur when repairing gasoline engines. Cotton yarns and rags that are contaminated with waste oil should be properly disposed of in a timely manner and must not be littered.

Sixth, it is to prevent electric shock: when repairing electrical equipment, there must be reliable grounding, and the switching equipment must be higher than people's heads. The wires should be replaced if they are aging or damaged to prevent electric shock or fire.

Seventh, it is to prevent burns: When repairing the running engine, you should prevent burns caused by exhaust gas from the exhaust pipe, and burns caused by boiling water in the water tank.