Cage chicken on the cage what kind of requirements

Egg cages: Combination of common ladder, half ladder and overlapping, each single cage length 40 cm, 45 cm deep, 45 cm high before, after 38 cm high, the bottom slope of 6 ° ~ 8 ° . Cage out of the cage set for 12 to 16 cm. Cage before the open, 21 to 24 cm wide; 40 cm high, leaving the bottom margin of about 4.5 cm from the bottom net out of the gap. Diameter of the cage bottom mesh spacing 2.2 cm, 6 cm latitude spacing. Top, side, after the network of pore size changes, the general mesh spacing of 10 to 20 cm, latitude 2.5 to 3 cm, each cage can raise 3 to 4 chickens.

Breeding chicken cage: The combination of three-tier use of overlapping type, the overall width of 1.6 to 1.7 meters, a height of 1.7 to 1.8 meters. A single cage 80 cm long, 40 cm high, 42 cm deep. Cage mesh 4 cm × 2 cm, the remaining mesh are 2.5 cm × 2.5 cm. Cage size 14 cm × 15 cm, each cage can accommodate 7 to 15 chickens.

Chicken cage: cage broodstock, generally used 3 to 4 overlapping cage. The total height of the cage is about 1.7 meters, the height of the cage is 10-15 cm, the length of each single cage is 70-100 cm, the cage height is 30-40 cm, the cage depth is 40-50 cm. Mesh is generally rectangular or square, the bottom hole diameter of 1.25 cm × 1.25 cm, side and top mesh aperture of 2.5X2.5 cm. The cage door is located in the front, and the adjustable range of cage door is 2 ~ 3 cm. Each cage can hold about 30 chicks.