High Quality Automatic Feeding Machine

High Quality Automatic Feeding Machine

1.Introduction:

Chain plate automatic feeding machine is a widely used in the building materials industry continuous feeding machinery and equipment, mainly by the rack, feeding box, feed sprocket, chain plate, motor and other components.

2.Advantages：

1) The machine drive smooth, even under the material, which can ensure uniform feeding machine;

2) the use of uniform feeding device feed through the gravity through the feed tube evenly feed the feed to the trough, to avoid the artificial feeding of the spill, saving the feed;

3) save labor, the machine is a single feeding, running 5-8 minutes (70 meters chicken coop).

3.Composition：

1) horizontal transmission of the dragon

2) hopper

3) control the electrical box

4) walking organization

5) speed control motor and walking gear motor

6) Extraction of the dragon motor

7) Feeder bracket

8) Feeding the dragon

4.Maintenance：

First, the feeder at the time of the start, it is best not to put things above, so easy to lead to the motor to bear the pressure is too large and burn the motor.

Second, check the belt is intact, whether there is loose. Feeding machine is to rely on the belt to transport materials, and only the belt to play the full performance of the machine, the amount of work to reach the maximum.

Third, because the feeder between the various parts are gear and chain control connection, it must make the gear and chain to ensure maximum lubrication, so that it will not be due to lack of lubrication and damage to the machine.

Fourth, because the production of feed will produce a lot of dust, will make the feeder control box to accumulate a lot of dust, dust will make the internal circuit short circuit, damage to electrical circuits and other parts, so every time to clean up Take a look at the dust in the box.

Fifth, the main driving force of the feeder is the motor, the motor has the power motor and the gear motor (because the motor speed is very high, so in the transmission power will use the gear motor to slow down). When using a little to check the power motor and gear motor is abnormal. The motor should be timely maintenance, such as: gear in the reducer with gear oil and so on.

Pre： Layer cage Specifications

Next：How to choose chicken cage？